|
|
Power-line network communication
Sláčik, Ján ; Rášo, Ondřej (referee) ; Kolka, Zdeněk (advisor)
The master’s thesis is dealing with PLC technology and its modem realization based on several types of standards by using commercially available integrated circuits. This projects also describes fundamentals and prerequisites for building the PLC network fulfilling the European standard CENELEC. The work further describes designed system concept, which serves as the automated system for the appliances connected to an electrical network. Components are selected for implementation and then is introduced concrete solution and implementation power-line network. Within the work are then other parts, that together form a system concept. Work includes the hardware and software implementation and a description of the options implemented system.
|
|
|
Narrowband PLC modem
Novák, Pavel ; Koton, Jaroslav (referee) ; Mlýnek, Petr (advisor)
The theses is focused on the use of PLC technology. The aim of the thesis is creating device which communicates in a narrowband transmission frequency band. Transmission of communication between plc elements runs through the low voltage distribution network. The frequency and phase modulations are used in order to change the character of data signal. Transmitter and receiver parameters are subjects to the CENELEC standard. The theses gives more attention to the area of hardware build communication element rather than the area of programming.
|
|
|
Remote measuring systems and its utilization in practise
Kukla, Zdeněk ; Škoda, Jan (referee) ; Baxant, Petr (advisor)
This master’s thesis is dealing with remote measuring systems and their utilization in power engineering. In the first part there are described requirements on an autonomous measuring system and description of AMM and AMR systems. Communicating and data flows working on accurately defined communicating layers are also depicted in this part. The attention is devoted to the possibility of data processing and functions of devices offered by these attributes. In the following part there are described reasons for utilization of remote measuring systems in power engineering and the main advantages of connection of more devices into one unit. After finding of required parametres and functions of systems, a suggestion of terminal device is created in the same way. The suggestion is described in the measuring part with A/D converter, processing in microprocessor, measuring and evaluating alogorithms and attributes of communication of bus used. The last part is devoted to utilization of remote analysis in small power stations in dispersed production. Formation of deformation of voltage, harmonic analysis of signal and its application for data processing are described there. Described analysis was tested on data acquired from a cogeneration unit.
|
|
|
Sniffer for power lines communication
Zapletal, Radek ; Šťastný, Ladislav (referee) ; Franek, Lešek (advisor)
This work deals with the design and development of universal software packet analyzer for capturing, analysis and filtering Power-line communication (PLC). The input data are provided by hardware packet analyzer over RS-232 interface. The application will find use in the area of Smart Grids and Smart Metering. This work describes both of these areas including sniffers and suggests several possible solutions with a selection of the best one and description of the development process.
|
|
|
Distribution network models
Hrabčík, Oldřich ; Mišurec, Jiří (referee) ; Mlýnek, Petr (advisor)
This thesis deals with transmission of data over power-line. There is theoretically described PLC technology and its classification, properties and used modulation techniques. A substantial part is focused on the mathematical description of distribution network using two methods, with multipath propagation and ABCD matrix. These methods are mutually compared. Furthermore, they are examined depending on the transfer functions of the topology and capabilities for unknown topology. Calculations of transfer functions are implemented using Matlab. The results were then processed graphically and evaluated.
|
|
|
Narrowband PLC modem
Novák, Pavel ; Koton, Jaroslav (referee) ; Mlýnek, Petr (advisor)
The theses is focused on the use of PLC technology. The aim of the thesis is creating device which communicates in a narrowband transmission frequency band. Transmission of communication between plc elements runs through the low voltage distribution network. The frequency and phase modulations are used in order to change the character of data signal. Transmitter and receiver parameters are subjects to the CENELEC standard. The theses gives more attention to the area of hardware build communication element rather than the area of programming.
|
|
| |
|
|
Narrowband PLC modem
Novák, Pavel ; Koton, Jaroslav (referee) ; Mlýnek, Petr (advisor)
The theses is focused on the use of PLC technology. The aim of the thesis is creating device which communicates in a narrowband transmission frequency band. Transmission of communication between plc elements runs through the low voltage distribution network. The frequency and phase modulations are used in order to change the character of data signal. Transmitter and receiver parameters are subjects to the CENELEC standard. The theses gives more attention to the area of hardware build communication element rather than the area of programming.
|
|
|
Sniffer for power lines communication
Zapletal, Radek ; Šťastný, Ladislav (referee) ; Franek, Lešek (advisor)
This work deals with the design and development of universal software packet analyzer for capturing, analysis and filtering Power-line communication (PLC). The input data are provided by hardware packet analyzer over RS-232 interface. The application will find use in the area of Smart Grids and Smart Metering. This work describes both of these areas including sniffers and suggests several possible solutions with a selection of the best one and description of the development process.
|
|
|
Narrowband PLC modem
Novák, Pavel ; Koton, Jaroslav (referee) ; Mlýnek, Petr (advisor)
The theses is focused on the use of PLC technology. The aim of the thesis is creating device which communicates in a narrowband transmission frequency band. Transmission of communication between plc elements runs through the low voltage distribution network. The frequency and phase modulations are used in order to change the character of data signal. Transmitter and receiver parameters are subjects to the CENELEC standard. The theses gives more attention to the area of hardware build communication element rather than the area of programming.
|
guest ::
